TRANSMISSION CASE OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE MANUAL TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE CLUTCH RELEASE FORK BOOT

  3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY

    Click here

  4. REMOVE CLUTCH HOUSING

    Click here

  5. REMOVE FRONT BEARING RETAINER

    Click here

  6. REMOVE TRANSMISSION FRONT BEARING RETAINER OIL SEAL


    1. B003OK6C02
      *a Protective Tape

      Using a screwdriver, pry out the transmission front bearing retainer oil seal.

      Note

      Be careful not to damage the transmission front bearing retainer oil seal and front bearing contact surfaces.

      Tech Tips

      Tape the screwdriver tip before use.

  7. INSTALL TRANSMISSION FRONT BEARING RETAINER OIL SEAL


    1. B003ML9N01

      Using SST and a press, drive in a new transmission front bearing retainer oil seal.

      SST
      09950-60010   ( 09951-00520, 09952-06010 )
      09950-70010   ( 09951-07150 )
      Standard drive in depth
      11.2 to 12.2 mm (0.441 to 0.480 in.)

      Note

      Be careful not to damage the transmission front bearing retainer oil seal lip.

  8. INSTALL FRONT BEARING RETAINER

    Click here

  9. INSTALL CLUTCH HOUSING

    Click here

  10. INSTALL CLUTCH RELEASE BEARING ASSEMBLY

    Click here

  11. INSTALL CLUTCH RELEASE FORK BOOT

  12. INSTALL MANUAL TRANSMISSION ASSEMBLY

    Click here