ENGINE GENERAL MAINTENANCE

CAUTION / NOTICE / HINT

PROCEDURE

1. REPLACE TIMING BELT

   Type	See procedure
   5L-E	Click here

2. INSPECT VALVE CLEARANCE

   Type	See procedure
   1GR-FE	Click here
   5L-E	Click here

3. INSPECT DRIVE BELT

   Type	See procedure
   1GR-FE	Click here
   1GD-FTV	Click here
   2GD-FTV	Click here
   5L-E	Click here
   2TR-FE	Click here

4. REPLACE DRIVE BELT (for 5L-E)

   
   

   1. Replace the drive belt.

      Click here

5. REPLACE ENGINE OIL AND OIL FILTER

   Type	See procedure
   1GR-FE	Click here
   1GD-FTV	Click here
   2GD-FTV	Click here
   5L-E	Click here
   2TR-FE	Click here

6. INSPECT COOLING AND HEATER SYSTEM

   
   

   1. Check that the radiator, condenser and/or intercooler is not blocked with leaves, dirt or insects, and clean them if necessary. Also check the hose connection for the installation condition, corrosion, etc.

7. INSPECT ENGINE COOLANT

   Type	See procedure
   1GR-FE	Click here
   1GD-FTV	Click here
   2GD-FTV	Click here
   5L-E	Click here
   2TR-FE	Click here

8. REPLACE ENGINE COOLANT

   Type	See procedure
   1GR-FE	Click here
   1GD-FTV	Click here
   2GD-FTV	Click here
   5L-E	Click here
   2TR-FE	Click here

9. INSPECT OIL COOLER HOSE AND CONNECTIONS

   
   

   1. Check the oil cooler hoses for cracks, leakage, loose connections and deformation.

10. INSPECT EXHAUST PIPES AND MOUNTINGS

    
    

    1. Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.

11. REPLACE SPARK PLUGS

    Type	See procedure
    1GR-FE	Click here
    2TR-FE	Click here

12. INSPECT BATTERY ELECTROLYTE LEVEL

    Type	See procedure
    1GR-FE	Click here
    1GD-FTV	Click here
    2GD-FTV	Click here
    5L-E	Click here
    2TR-FE	Click here

13. INSPECT WATER SEDIMENT ACCUMULATOR

    Type	See procedure
    1GD-FTV	Click here
    2GD-FTV	Click here
    5L-E	Click here

14. REPLACE FUEL FILTER

    Type	See procedure
    1GR-FE	Click here
    2TR-FE	Click here

15. INSPECT AIR CLEANER FILTER

    Type	See procedure
    1GR-FE	Click here
    1GD-FTV	Click here
    2GD-FTV	Click here
    5L-E	Click here
    2TR-FE	Click here

16. INSPECT AIR FLOW METER (for 1GD-FTV)

    
    

    1. Blow air to the sensor intermittently for approximately 30 seconds.

17. INSPECT VACUUM PUMP OIL HOSE (for 5L-E)

    
    

    1. Check the vacuum pump oil hoses for cracks, leakage, loose connections and deformation.

18. INSPECT FUEL TANK CAP GASKET

    Type	See procedure
    1GR-FE	Click here
    1GD-FTV	Click here
    2GD-FTV	Click here
    5L-E	Click here
    2TR-FE	Click here

19. INSPECT FUEL LINES, FUEL LINE CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BAND

    
    

    1. Visually check the fuel lines and hoses for cracks, leakage, loose connections and deformation. Also, visually check the tank band for looseness.

20. INSPECT CHARCOAL CANISTER

    Type	See procedure
    1GR-FE	Click here
    2TR-FE	Click here