CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the ignition coil assembly or spark plug removal/installation are shown below.
Replacement Part or Procedure | Necessary Procedures | Effects/Inoperative when not Performed | Link |
---|---|---|---|
|
Inspection After Repair | Poor idle, engine start, etc. |
PROCEDURE
REMOVE V-BANK COVER
REMOVE NO. 2 SURGE TANK STAY
Remove the 2 bolts and No. 2 surge tank stay.
REMOVE IGNITION COIL ASSEMBLY
Disconnect the 6 ignition coil connectors.
Remove the 6 bolts and 6 ignition coil assemblies.
REMOVE SPARK PLUG
Remove the 6 spark plugs.