САЛЬНИК ПЕРЕХОДНИКА РАЗДАТОЧНОЙ КОРОБКИ ЗАМЕНА

PROCEDURE


  1. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

    Click here

  2. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

    Click here

  3. REMOVE TRANSFER ASSEMBLY

    Click here

  4. REMOVE TRANSFER ADAPTER OIL SEAL


    1. B0028K6N01

      Using SST, tap out the transfer adapter oil seal from the transfer adapter sub-assembly.

      SST
      09308-00010

  5. INSTALL TRANSFER ADAPTER OIL SEAL


    1. B0024OYN01

      Using SST and a hammer, tap in a new transfer adapter oil seal to the transfer adapter sub-assembly.

      SST
      09223-00010
      Standard depth
      45.4 to 46.4 mm (1.79 to 1.82 in.)

      Note

      Be careful not to damage the lip of the transfer adapter oil seal.

  6. INSTALL TRANSFER ASSEMBLY

    Click here

  7. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

    Click here

  8. INSTALL FRONT PROPELLER SHAFT ASSEMBLY

    Click here