ДАТЧИК ПОЛОЖЕНИЯ РАСПРЕДВАЛА УСТАНОВКА

PROCEDURE

1. INSTALL VVT SENSOR (for Bank 2)

   
   

   1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note

      
      

      • When reusing the VVT sensor, inspect the O-ring.

      • If the O-ring has scratches or cuts, replace the VVT sensor.

   2. Install the VVT sensor with the bolt.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   3. Connect the VVT sensor connector.

2. INSTALL VVT SENSOR (for Bank 1)

   
   

   1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note

      
      

      • When reusing the VVT sensor, inspect the O-ring.

      • If the O-ring has scratches or cuts, replace the VVT sensor.

   2. Install the VVT sensor with the bolt.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   3. Connect the VVT sensor connector.

3. INSTALL THROTTLE BODY WITH MOTOR ASSEMBLY

   Click here