HOOD LOCK CONTROL CABLE ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. B0057LHC15
      *1 String

      Tie the string that was passed through the engine compartment room to the end of the hood lock control cable assembly as shown in the illustration.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment room.

    2. Pass the hood lock control cable assembly through the vehicle body, and then attach each clamp.

    3. Untie the string from the hood lock control cable assembly.

      B005882C02
      *1 Hood Lock Control Cable Assembly *2 Clamp
      *3 Stopper - -

  2. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. B0057LHC16
      *1 String

      Tie the string that was passed through the engine compartment room to the end of the hood lock control cable assembly as shown in the illustration.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment room.

    2. Pass the hood lock control cable assembly through the vehicle body and then attach each clamp.

    3. Untie the string from the hood lock control cable assembly.

      B0057WTC05
      *1 Hood Lock Control Cable Assembly *2 Clamp
      *3 Stopper - -

  3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.

    2. Attach the 3 claws to install the hood lock control lever sub-assembly.

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  6. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  8. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL HOOD TO FRONT FENDER SEAL LH


    1. Attach the clip to install the hood to front fender seal LH.

  10. INSTALL HOOD TO FRONT FENDER SEAL RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL CENTER HOOD CUSHION


    1. Attach the 2 claws to install the center hood cushion.

  12. INSTALL HOOD LOCK ASSEMBLY

    Click here

  13. INSTALL HOOD LOCK CONTROL CABLE COVER (for RHD, w/ Cover)


    1. Attach the claw to install the hood lock control cable cover.

    2. Install the screw.

  14. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here