ROOF SUNSHADE INSTALLATION

PROCEDURE

1. INSTALL SUNSHADE HOUSING ASSEMBLY

   
   

   1. Install the sunshade housing assembly with the 4 bolts and 7 nuts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Attach the 2 clamps.

2. INSTALL REAR SIDE RAIL SPACER LH

   Click here

3. INSTALL REAR SIDE RAIL SPACER RH

   Tech Tips

   Use the same procedure described for the LH side.

4. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH

   Click here

5. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

7. RESET SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY

   Click here

8. CHECK ROOF SUNSHADE SYSTEM

   Click here

9. CHECK SRS WARNING LIGHT

   Click here