FRONT CONSOLE BOX INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL CONSOLE BOX ASSEMBLY


    1. Attach the 4 guides to install the console box assembly.

    2. Install the 6 bolts.

    3. Connect the connectors and attach the clamps.

      B005ACEC06
      *a Guide *b Bolt
      *c Connector *d Clamp

  2. INSTALL CONSOLE BOX CARPET


    1. Install the console box carpet.

  3. INSTALL CONSOLE BOX POCKET (w/o Wireless Charger)


    1. Install the console box pocket.

  4. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. B005A84

      Connect the connectors.

    2. Attach the 8 clips and 3 claws to install the rear console end panel sub-assembly.

  5. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACE COVER LH


    1. B005BAU

      for LHD:


      1. Attach the guide and 2 clips to install the inner No. 1 instrument panel brace cover LH.

    2. B0059P6

      for RHD:


      1. Attach the guide and 2 clips to install the inner No. 1 instrument panel brace cover LH.

  6. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACE COVER RH


    1. B0058SC

      for LHD:


      1. Attach the guide and 2 clips to install the inner No. 1 instrument panel brace cover RH.

    2. B005ASB

      for RHD:


      1. Attach the guide and 2 clips to install the inner No. 1 instrument panel brace cover RH.

  7. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY


    1. B0059X3

      Connect the connectors and attach the clamp.

    2. Attach the 8 clips and 4 claws to install the upper rear console panel sub-assembly.

  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. B0059XX

      Install the shift lever knob sub-assembly and twist it in the direction indicated by the arrow.

    2. B005AIHC01
      *1 Shifting Hole Cover Sub-assembly

      Attach the 2 claws to install the shifting hole cover sub-assembly.

  9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  10. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET

    Click here

  11. INSTALL INSTRUMENT PANEL FINISH PLATE

    Click here

  12. INSTALL NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  13. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  14. INSTALL NO. 1 SWITCH HOLE BASE

    Click here

  15. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  16. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  17. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  18. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  19. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

  20. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

  21. INSTALL UPPER REAR CONSOLE PANEL

    Click here

  22. INSTALL CONSOLE ARMREST ASSEMBLY

    Click here

  23. INSTALL COWL SIDE TRIM BOARD RH (for RHD)

    Click here

  24. INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here