ROOM TEMPERATURE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)


    1. Connect the aspirator hose.

    2. Connect the connector.

    3. Attach the 2 claws to install the cooler thermistor (room temperature sensor).

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  5. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  6. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

  7. INSTALL UPPER REAR CONSOLE PANEL

    Click here

  8. INSTALL CONSOLE ARMREST ASSEMBLY

    Click here

  9. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  10. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Click here