NETWORK GATEWAY ECU(for RHD) INSTALLATION

PROCEDURE

1. INSTALL NETWORK GATEWAY ECU

   
   

   1. Attach the 2 claws to install the network gateway ECU.

2. INSTALL ECU INTEGRATION BOX RH

   Click here

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

6. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

7. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

   Click here

8. INSTALL REAR CONSOLE ARMREST ASSEMBLY

   Click here

9. INSTALL COWL SIDE TRIM BOARD RH

   Click here

10. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

    Click here

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here