NOISE FILTER INSTALLATION

PROCEDURE


  1. INSTALL RADIO SETTING CONDENSER


    1. B005AHX

      Attach the claw to install a new terminal cover to the wire harness.

      Note


      • Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.

      • Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

      • Do not use excessive force when inserting the wire harness into the terminal cover.

      • If the terminal cover has been deformed during installation, replace the terminal and terminal cover with new ones.

    2. B0058EE

      Attach the 6 claws to install 2 new terminal covers with wire harness to a new condenser.

      Note


      • Do not use excessive force when inserting the terminal covers into the condenser.

      • If a terminal cover has been deformed during installation, replace the terminal, terminal covers and condenser with new ones.

    3. B00578Y

      Insert the cover as shown in the illustration and attach the claw.

    4. Attach the clamp to temporarily install the radio setting condenser with wire harness.

    5. Install the radio setting condenser with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click here

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  6. INSTALL ROPE HOOK ASSEMBLY

    Click here

  7. INSTALL UPPER DECK TRIM SIDE BOARD LH

    Click here

  8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  9. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  10. INSTALL REAR FLOOR FINISH PLATE

    Click here

  11. INSTALL NO. 2 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)

    Click here

  12. INSTALL NO. 2 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  13. INSTALL NO. 1 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)

    Click here

  14. INSTALL NO. 1 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  15. INSTALL DECK FLOOR BOX RH (w/o Spare Tire)

    Click here

  16. INSTALL DECK FLOOR BOX RH (w/ Spare Tire)

    Click here

  17. INSTALL DECK FLOOR BOX LH (w/o Spare Tire)

    Click here

  18. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  19. INSTALL SPARE TIRE (w/ Spare Tire)

    Click here

  20. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  21. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  22. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

    Click here

  23. INSTALL DECK BOARD ASSEMBLY

    Click here

  24. INSTALL TONNEAU COVER ASSEMBLY

    Click here

  25. INSTALL REAR SEAT ASSEMBLY (for Power Seat)

    Click here

  26. INSTALL REAR SEAT ASSEMBLY (for Manual Seat)

    Click here