TIRE PRESSURE WARNING RECEIVER(for RH Side) INSTALLATION
PROCEDURE
-
INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
-
Connect the connector to the tire pressure warning ECU and receiver.
-
Attach the 2 guides to temporarily install the tire pressure warning ECU and receiver.
-
*a for bolt A *b for bolt B Install the bolt.
- Torque:
- for bolt A
- 8.3 N*m { 85 kgf*cm, 73 in.*lbf }
- for bolt B
- 10 N*m { 102 kgf*cm, 7 ft.*lbf }
-
-
INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH
-
INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
-
INSTALL UPPER DECK TRIM SIDE BOARD RH
-
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
-
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
-
INSTALL ROPE HOOK ASSEMBLY
-
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
-
INSTALL NO. 1 SEAT LEG ASSEMBLY
-
for Manual Seat: Click here
-
for Power Seat: Click here
-
-
INSTALL BATTERY SERVICE COVER BOARD
-
for Manual Seat: Click here
-
for Power Seat: Click here
-
-
INSTALL REAR FLOOR FINISH PLATE
-
INSTALL REAR FLOOR CARPET (w/o Spare Tire)
-
INSTALL NO. 2 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)
-
INSTALL NO. 2 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)
-
INSTALL NO. 1 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)
-
INSTALL NO. 1 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)
-
INSTALL DECK FLOOR BOX RH (w/ Spare Tire)
-
INSTALL DECK FLOOR BOX RH (w/o Spare Tire)
-
INSTALL DECK FLOOR BOX LH (w/ Spare Tire)
-
INSTALL DECK FLOOR BOX LH (w/o Spare Tire)
-
INSTALL SPARE TIRE (w/ Spare Tire)
-
INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)
-
INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY
-
INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY
-
INSTALL DECK BOARD ASSEMBLY
-
INSTALL TONNEAU COVER ASSEMBLY
-
INSTALL REAR SEAT ASSEMBLY
-
for Manual Seat: Click here
-
for Power Seat: Click here
-
-
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
-
REGISTRATION OF TRANSMITTER ID
-
INSPECT TIRE PRESSURE WARNING SYSTEM
-
PERFORM INITIALIZATION