TIRE PRESSURE WARNING RECEIVER(for LH Side) INSTALLATION

PROCEDURE


  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER


    1. Connect the connector to the tire pressure warning ECU and receiver.

    2. Attach the 2 guides to temporarily install the tire pressure warning ECU and receiver.

    3. B005A4RC01
      *a for bolt A
      *b for bolt B

      Install the bolt.

      Torque:
      for bolt A
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }
      for bolt B
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click here

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  4. INSTALL UPPER DECK TRIM SIDE BOARD LH

    Click here

  5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  7. INSTALL ROPE HOOK ASSEMBLY

    Click here

  8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  9. INSTALL NO. 1 SEAT LEG ASSEMBLY


  10. INSTALL BATTERY SERVICE COVER BOARD


  11. INSTALL REAR FLOOR FINISH PLATE

    Click here

  12. INSTALL NO. 2 TOOL BOX SUB-ASSEMBLY

    Click here

  13. INSTALL NO. 1 TOOL BOX SUB-ASSEMBLY

    Click here

  14. INSTALL DECK FLOOR BOX RH

    Click here

  15. INSTALL DECK FLOOR BOX LH

    Click here

  16. INSTALL SPARE TIRE

  17. INSTALL REAR DECK FLOOR BOX

    Click here

  18. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  19. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

    Click here

  20. INSTALL DECK BOARD ASSEMBLY

    Click here

  21. INSTALL TONNEAU COVER ASSEMBLY

    Click here

  22. INSTALL REAR SEAT ASSEMBLY


  23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  24. REGISTRATION OF TRANSMITTER ID

    Click here

  25. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  26. PERFORM INITIALIZATION

    Click here