REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH


    1. B005AOEC01
      *a Pin
      *b Guide

      Attach the guide and pin to set the rear combination light assembly LH.

    2. B0058EVC01
      *a Grommet

      Install the 3 screws.

    3. Pass the wire harness into the vehicle and connect the grommet.

    4. Place your hand between the deck trim side panel assembly LH and the body to connect the connector.

  2. INSTALL REAR COMBINATION LIGHT COVER LH


    1. B00585L

      Attach the 7 claws to install the rear combination light cover LH.

  3. CONNECT DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Connect the rear side of the deck trim side panel assembly LH.

      Click here

  4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  6. INSTALL REAR FLOOR FINISH PLATE

    Click here

  7. INSTALL DECK FLOOR BOX LH (w/o Spare Tire)

    Click here

  8. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  9. INSTALL DECK FLOOR BOX RH (w/o Spare Tire)

    Click here

  10. INSTALL DECK FLOOR BOX RH (w/ Spare Tire)

    Click here

  11. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  12. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

    Click here

  13. INSTALL SPARE TIRE (w/ Spare Tire)

    Click here

  14. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  15. INSTALL DECK BOARD ASSEMBLY

    Click here

  16. INSTALL TONNEAU COVER ASSEMBLY

    Click here

  17. INSTALL REAR BUMPER ASSEMBLY

    Click here