REAR TRAILING ARM REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

    Click here

  2. DISCONNECT REAR SKID CONTROL SENSOR WIRE LH (for 2WD)


    1. w/o AVS:

      Click here

    2. w/ AVS:

      Click here

  3. DISCONNECT REAR SPEED SENSOR LH (for AWD)


    1. w/o AVS:

      Click here

    2. w/ AVS:

      Click here

  4. DISCONNECT PARKING BRAKE WIRE ASSEMBLY NO.1

    Click here

  5. REMOVE NO. 2 FLOOR UNDER COVER

    Click here

  6. REMOVE REAR SHOCK ABSORBER ASSEMBLY LH

    Click here

  7. REMOVE REAR TRAILING ARM ASSEMBLY LH


    1. A01XO6Q

      Loosen the nut of the rear trailing arm assembly LH.

    2. A01XOHJ

      Remove the 2 bolts from the rear axle carrier LH.

    3. A01XNYY

      Remove the 3 bolts and rear trailing arm assembly LH from the vehicle.

    4. A01XONU

      Remove the bolt, nut and rear suspension arm bracket from the rear trailing arm assembly LH.