Click here

HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. Click here

    REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  3. Click here

    REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. Click here

    DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  5. Click here

    REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. B0066W9

      Disconnect the hood lock control cable assembly to remove the hood lock control lever sub-assembly.

  6. Click here

    REMOVE HOOD LOCK RELEASE LEVER PROTECTOR


    1. B0066C6

      Disengage the 2 clamps.

    2. B00672Z

      Remove the 2 clips.

    3. Disengage the clamp to remove the hood lock release lever protector.

  7. Click here

    REMOVE HOOD LOCK ASSEMBLY


    1. B0065PZ

      Disconnect the connector.

    2. Remove the 3 bolts.

    3. for LHD:


      1. B0065H5

        Disconnect the hood lock control cable assembly to remove the hood lock assembly.

    4. for RHD:


      1. B0066C0

        Disconnect the hood lock control cable assembly to remove the hood lock assembly.

  8. Click here

    REMOVE HOOD LOCK CONTROL CABLE COVER (w/ Cover)


    1. B00688G

      Remove the 2 bolts.

    2. Disengage the 2 claws and remove the hood lock control cable cover.

  9. Click here

    REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. B00659C

      Tie a string to the end of the hood lock control cable assembly.

      Tip:

      Use a length of string long enough to pass through the engine compartment.

    2. B00675DC01
      *1 Hood Lock Control Cable Assembly
      *a Grommet

      Pull out the hood lock control cable assembly through the grommet as shown in the illustration.

      Tip:

      Leave the string inside the grommet.

    3. Disconnect the string from the hood lock control cable assembly.

    4. B0067C7C01
      *1 Hood Lock Control Cable Assembly - -
      *a Clamp - -

      Using a screwdriver, disengage the 4 clamps.

      Tip:

      Tape the screwdriver tip before use.

    5. Pull the hood lock control cable assembly from the engine compartment to remove it.

  10. Click here

    REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. B00659C

      Tie a string to the end of the hood lock control cable assembly.

      Tip:

      Use a length of string long enough to pass through the engine compartment.

    2. B0065ASC01
      *1 Hood Lock Control Cable Assembly
      *a Grommet

      Pull out the hood lock control cable assembly through the grommet as shown in the illustration.

      Tip:

      Leave the string inside the grommet.

    3. Disconnect the string from the hood lock control cable assembly.

    4. B00687HC01
      *1 Hood Lock Control Cable Assembly - -
      *a Clamp - -

      Using a screwdriver, disengage the 4 clamps.

      Tip:

      Tape the screwdriver tip before use.

    5. Pull the hood lock control cable assembly from the engine compartment to remove it.