HAZARD WARNING SWITCH INSTALLATION

PROCEDURE

1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY

   
   

   1. Engage the 2 claws to install the hazard warning signal switch assembly.

   2. Connect the connector.

2. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

   
   

   1. Engage the 8 claws to install the center instrument panel register assembly.

   2. Engage the clamp.

3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

4. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for LHD)

   Click here