FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. w/o Passenger Airbag ON/OFF Indicator:


      1. B004OP2C01
        *a Airbag Connector
        *b Airbag Connector Lock

        Connect the airbag connector of the No. 2 instrument panel wire to the instrument panel passenger airbag assembly.

        Note

        When connecting any airbag connector, take care not to damage the airbag wire harness.

      2. Push in the airbag connector lock to install the airbag connector to the instrument panel passenger airbag assembly.

      3. Engage the clamp.

    2. w/ Passenger Airbag ON/OFF Indicator:


      1. B004Q9RC01
        *a Airbag Connector
        *b Airbag Connector Lock

        Connect the 2 airbag connectors of the No. 2 instrument panel wire to the instrument panel passenger airbag assembly.

        Note


        • When connecting any airbag connector, take care not to damage the airbag wire harness.

        • Be sure to only connect the connectors to each corresponding color.

      2. Push in the 2 airbag connector locks to install the 2 airbag connectors to the instrument panel passenger airbag assembly.

      3. Engage the clamp.

  2. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY


    1. w/o Passenger Airbag ON/OFF Indicator:


      1. B004QXT

        Engage the 3 hooks.

      2. B004Q9W

        Push in the instrument panel passenger airbag assembly to engage the 3 hooks.

      3. B004Q1I

        Install the instrument panel passenger airbag assembly with the 2 screws.

    2. w/ Passenger Airbag ON/OFF Indicator:


      1. B004Q57

        Engage the 3 hooks.

      2. B004P3L

        Push in the instrument panel passenger airbag assembly to engage the 3 hooks.

      3. B004QP7

        Install the instrument panel passenger airbag assembly with the 2 screws.

  3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. CONNECT NO. 2 INSTRUMENT PANEL WIRE


    1. Check that the power switch is off.

    2. Check that the cable is disconnected from the negative (-) auxiliary battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

      B004PKN
    3. B004QOB

      w/o Passenger Airbag ON/OFF Indicator:


      1. Connect the connector.

        Note

        When connecting any airbag connector, take care not to damage the airbag wire harness.

    4. B004OIG

      w/ Passenger Airbag ON/OFF Indicator:


      1. Connect the connector.

        Note

        When connecting any airbag connector, take care not to damage the airbag wire harness.

  5. INSTALL GLOVE BOX LIGHT ASSEMBLY

    Click here