ASC ECU REMOVAL

PROCEDURE


  1. REMOVE DECK BOARD ASSEMBLY

    Click here

  2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  3. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  4. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  5. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work.

    Click here

  6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  7. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  8. REMOVE STEREO COMPONENT EQUALIZER ASSEMBLY WITH BRACKET


    1. B002K2N

      Remove the 2 bolts and detach the 2 guides.

    2. Disconnect all the connectors and remove the stereo component equalizer assembly with bracket.

  9. REMOVE STEREO COMPONENT EQUALIZER ASSEMBLY


    1. B002KS2

      Remove the 2 nuts and stereo component equalizer assembly.