HARD DISK DRIVE REMOVAL

PROCEDURE


  1. REMOVE DECK BOARD ASSEMBLY

    Click here

  2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  3. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  4. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  5. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  6. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. REMOVE RADIO RECEIVER ASSEMBLY

    Click here

  8. REMOVE NO. 1 RADIO BRACKET

    Click here

  9. REMOVE HARD DISC


    1. B002KRT

      Remove the 3 screws.

    2. B002J8A

      Remove the cover in the direction of the arrow shown in the illustration.

    3. B002JIW

      Remove the hard disc in the direction of the arrow shown in the illustration.