DRIVING SUPPORT ECU REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  4. REMOVE DRIVING SUPPORT ECU ASSEMBLY


    1. B002HA9C01
      *A for LHD
      B002HVY Nut
      B002I10 Connector
      B002HOBC01
      *A for RHD
      B002HVY Nut
      B002I10 Connector

      Disconnect the connector.

    2. Remove the nut and driving support ECU assembly.

      Note

      Do not drop the driving support ECU assembly or subject it to strong shocks.