FRONT LOWER SUSPENSION ARM(for 2GR-FKS) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY


    1. Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly.

    2. A00272BN01

      Install the front lower No. 1 suspension arm sub-assembly to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.

      Torque:
      Bolt (1), (2)
      200 N*m  { 2039 kgf*cm, 148 ft.*lbf }
      Bolt (3)
      135 N*m  { 1377 kgf*cm, 100 ft.*lbf }

      Note

      Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

  2. INSTALL ENGINE MOUNTING INSULATOR (When Not Using the Engine Support Bridge)

    Click here

  3. INSTALL FRONT FRAME ASSEMBLY

    When Not Using the Engine Support Bridge: Click here

    When Using the Engine Support Bridge: Click here