COOLING FAN MOTOR INSTALLATION

PROCEDURE

1. INSTALL COOLING FAN MOTOR RH

   
   

   1. Install the cooling fan motor RH with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

   2. Connect the cooling fan motor RH connector and engage the wire harness to the clamp.

2. INSTALL COOLING FAN MOTOR LH

   
   

   1. Install the cooling fan motor LH with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

   2. Connect the cooling fan motor LH connector and engage the wire harness to the 2 clamps.

3. INSTALL FAN RH

   Note

   Do not reverse the position of the fan RH and fan LH when installing them. Doing so may damage the parts.

   
   

   1. Install the fan RH with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

4. INSTALL FAN LH

   Note

   Do not reverse the position of the fan RH and fan LH when installing them. Doing so may damage the parts.

   
   

   1. Install the fan LH with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

5. INSTALL FAN SHROUD ASSEMBLY

   
   

   1. Engage the 3 guides.

   2. Engage the 3 claws to install the fan shroud assembly to the radiator assembly.

      Note

      Do not damage the radiator assembly when installing the fan shroud assembly.

   3. Engage the 4 wire harness clamps.

   4. Connect the cooling fan ECU connector.

6. CONNECT RADIATOR RESERVE TANK HOSE

   
   

   1. Connect the radiator reserve tank hose.

7. CONNECT NO. 1 RADIATOR HOSE

   
   

   1. Connect the No. 1 radiator hose and slide the clip to secure it.

8. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

   Click here

9. INSTALL HOOD LOCK ASSEMBLY

   Click here

10. INSTALL BATTERY

    Click here

11. INSTALL INLET AIR CLEANER ASSEMBLY

    Click here

12. INSTALL RADIATOR GRILLE

    Click here

13. ADD ENGINE COOLANT

    Click here

14. INSPECT FOR COOLANT LEAK

    Click here

15. INSTALL NO. 1 ENGINE UNDER COVER

    Click here