DIFFERENTIAL OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  2. SEPARATE FRONT FENDER LINER LH

    Click here

  3. REMOVE FRONT FENDER APRON SEAL LH

    Click here

  4. DRAIN AUTOMATIC TRANSAXLE FLUID


    1. A002CIX

      Remove the refill plug and gasket from the automatic transaxle assembly.

    2. A002BGQ

      Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the automatic transaxle oil pan sub-assembly.

    3. A00292NC20
      *1 No. 1 Transmission Oil Filler Tube
      *a Hexagon Socket Wrench
      *b Overflow Plug Hole

      Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the automatic transaxle oil pan sub-assembly.

    4. Drain the automatic transaxle fluid from the automatic transaxle assembly.

    5. A00292NC21
      *1 No. 1 Transmission Oil Filler Tube
      *a Hexagon Socket Wrench
      *b Overflow Plug Hole

      Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the automatic transaxle oil pan sub-assembly.

      Torque:
      0.8 N*m  { 8 kgf*cm, 7 in.*lbf }
    6. A002BGQ

      Using a 6 mm hexagon socket wrench, temporarily install the gasket and overflow plug to the automatic transaxle oil pan sub-assembly.

      Tech Tips

      Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.

    7. A002CIX

      Temporarily install the gasket and refill plug to the automatic transaxle assembly.

      Tech Tips

      Reuse the old gasket as the refill plug will be removed again to adjust the fluid level.

  5. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    Click here

  6. REMOVE DRIVE SHAFT BEARING BRACKET

    Click here

  7. REMOVE FRONT DRIVE SHAFT OIL SEAL LH


    1. A002A0FN01

      Using SST, remove the front drive shaft oil seal LH from the automatic transaxle assembly.

      SST
      09308-00010

      Note

      Be careful not to damage the transaxle case sub-assembly.

  8. REMOVE FRONT DRIVE SHAFT OIL SEAL RH


    1. A002AZBN01

      Using SST, remove the front drive shaft oil seal RH from the automatic transaxle assembly.

      SST
      09308-00010

      Note

      Be careful not to damage the transaxle housing.

  9. INSTALL FRONT DRIVE SHAFT OIL SEAL LH


    1. A002AXUN01

      Using SST and a hammer, install a new front drive shaft oil seal LH to the automatic transaxle assembly.

      SST
      09316-10010
      09950-70010   ( 09951-07100 )
      Standard Depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note


      • Make sure that the front drive shaft oil seal LH is installed in the correct direction.

      • Do not damage the front drive shaft oil seal LH lip.

    2. Coat the lip of the front drive shaft oil seal LH with MP grease.

  10. INSTALL FRONT DRIVE SHAFT OIL SEAL RH


    1. A002BBON03

      Using SST and a hammer, install a new front drive shaft oil seal RH to the automatic transaxle assembly.

      SST
      09316-60011   ( 09316-00011 )
      Standard Depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note


      • Make sure that the front drive shaft oil seal RH is installed in the correct direction.

      • Do not damage the front drive shaft oil seal RH lip.

    2. Coat the lip of the front drive shaft oil seal RH with MP grease.

  11. INSTALL DRIVE SHAFT BEARING BRACKET

    Click here

  12. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    Click here

  13. ADD AUTOMATIC TRANSAXLE FLUID

    Click here

  14. INSTALL FRONT FENDER APRON SEAL LH

    Click here

  15. INSTALL FRONT FENDER LINER LH

    Click here

  16. INSTALL NO. 1 ENGINE UNDER COVER

    Click here