FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL TIMING CHAIN COVER OIL SEAL


    1. Apply MP grease to the lip of a new timing chain cover oil seal.

      Note


      • Keep the lip free from foreign matter.

      • Do not allow MP grease to contact the dust seal.

    2. A0026UEE01

      Using SST and a hammer, tap in the timing chain cover oil seal until its surface is flush with the edge of the timing chain cover sub-assembly.

      SST
      09223-22010

      Note


      • Keep the lip free from foreign matter.

      • Do not tap in the timing chain cover oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY


    1. Align the crankshaft pulley key with the key groove of the crankshaft pulley.

    2. A002A41C01
      *a Hold
      *b Turn

      Using SST, hold the crankshaft pulley and install the crankshaft pulley bolt.

      SST
      09213-54015
      09330-00021
      Torque:
      260 N*m  { 2651 kgf*cm, 192 ft.*lbf }

      Tech Tips

      SST (crankshaft pulley holding tool) fixing bolt part No.: 91551-80650 (2 pcs)

  3. INSTALL V-RIBBED BELT

    Click here

  4. INSTALL FRONT FENDER APRON SEAL RH

    Click here

  5. INSTALL FRONT FENDER LINER RH

    Click here

  6. INSTALL NO. 1 ENGINE UNDER COVER

    Click here

  7. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }