ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   Tech Tips

   Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

   Click here

   
   

   1. Install a new gasket to the engine coolant temperature sensor.

   2. Using a 19 mm union nut wrench, install the engine coolant temperature sensor to the cylinder head sub-assembly.

      Torque:

      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      
      

      • If the engine coolant temperature sensor has been struck or dropped, replace it.

      • Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a union nut wrench.

        Click here

   3. Connect the engine coolant temperature sensor connector.

   4. Install the heater bracket to the cylinder head sub-assembly with the bolt.

      Torque:

      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

   5. Engage the heater hose to the heater bracket.

2. INSTALL AIR CLEANER ASSEMBLY

   Click here

3. ADD ENGINE COOLANT

   Click here

4. INSPECT FOR COOLANT LEAK

   Click here

5. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here

6. PERFORM INITIALIZATION

   
   

   1. Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

      Click here