CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)

   
   

   1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

   2. Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      
      

      • If the camshaft position sensor has been struck or dropped, replace it.

      • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.

   3. Connect the camshaft position sensor connector.

2. INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)

   
   

   1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

   2. Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      
      

      • If the camshaft position sensor has been struck or dropped, replace it.

      • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.

   3. Connect the camshaft position sensor connector.

3. INSPECT FOR ENGINE OIL LEAK

   Click here

4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here