COOLING FAN MOTOR INSTALLATION

PROCEDURE

1. INSTALL NO. 2 COOLING FAN MOTOR

   
   

   1. Install the No. 2 cooling fan motor with the 3 screws.

      Torque:

      2.6 N*m  { 27 kgf*cm, 23 in.*lbf }

   2. Connect the No. 2 cooling fan motor connector and engage the wire harness to the 2 clamps.

2. INSTALL COOLING FAN MOTOR

   
   

   1. Install the cooling fan motor with the 3 screws.

      Torque:

      2.6 N*m  { 27 kgf*cm, 23 in.*lbf }

   2. Connect the cooling fan motor connector and engage the wire harness to the 2 clamps.

3. INSTALL NO. 2 FAN

   Note

   Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

   
   

   1. Install the No. 2 fan with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

4. INSTALL FAN

   Note

   Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

   
   

   1. Install the fan with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

5. INSTALL FAN SHROUD ASSEMBLY

   
   

   1. Engage the 3 guides.

   2. Engage the 3 claws to install the fan shroud assembly to the radiator assembly.

      Note

      Do not damage the radiator assembly when installing the fan shroud assembly.

   3. Engage the 4 wire harness clamps.

   4. Connect the cooling fan ECU connector.

6. CONNECT INLET NO. 1 OIL COOLER HOSE

   
   

   1. Engage the clamp to connect the inlet No. 1 oil cooler hose to the fan shroud.

7. CONNECT RADIATOR RESERVE TANK HOSE

   
   

   1. Connect the radiator reserve tank hose.

8. CONNECT NO. 1 RADIATOR HOSE

   
   

   1. Connect the No. 1 radiator hose and slide the clip to secure it.

9. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

   Click here

10. INSTALL HOOD LOCK ASSEMBLY

    Click here

11. INSTALL BATTERY

    Click here

12. INSTALL INLET AIR CLEANER ASSEMBLY

    Click here

13. INSTALL RADIATOR GRILLE

    Click here

14. ADD ENGINE COOLANT

    Click here

15. INSPECT FOR COOLANT LEAK

    Click here

16. INSTALL NO. 1 ENGINE UNDER COVER

    Click here