MOTOR CABLE INSTALLATION

PROCEDURE


  1. INSTALL MOTOR CABLE

    Note

    When installing the motor cable, make sure not to bend the motor cable base on the hybrid transmission assembly side.


    1. A01MTENN01

      Using an insulated tool, temporarily install the motor cable to the hybrid vehicle transmission assembly with the 2 bolts.

      Note

      Keep foreign matter, water, etc, away from the motor cable terminals and their installation area.

      Tech Tips

      When installing the motor cable, hold the motor cable by hand so that the motor cable base is not bent.

    2. Using an insulated tool, tighten the 2 bolts in the order shown in the illustration.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Using an insulated tool, install the motor cable to the hybrid vehicle transmission assembly with the 3 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Note

      Keep foreign matter, water, etc, away from the motor cable terminals and their installation area.

      Tech Tips

      When installing the motor cable, hold the motor cable by hand so that the motor cable base is not bent.

    4. Engage the 2 claws to install a new terminal cap to the hybrid vehicle transmission assembly.

      Note


      • Check that the terminal cap is securely installed.

      • Do not pinch the O-ring.

    5. A01MSLY

      Using an insulated tool, install the connector cover to the motor cable and hybrid vehicle transmission assembly with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Note

      Make sure to insert the protruding part of the connector cover fully into the stopper hole and then tighten the bolts.

    6. Connect the 2 clamps to the engine assembly and hybrid vehicle transmission assembly.

      A01MRMXC01
      *A for LHD *B for RHD
      *1 Wiring Harness Clamp - -
      *a Matchmark - -

    7. Engage the motor cable side lock of the wiring harness clamp to secure the motor cable as shown in the illustration.

      Tech Tips

      Align the wiring harness clamp with the matchmark.

  2. INSTALL ENGINE ASSEMBLY WITH TRANSMISSION

    Click here