COOLING FAN MOTOR INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 COOLING FAN MOTOR


    1. Install the No. 2 cooling fan motor with the 3 screws.

      Torque:
      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

  2. INSTALL COOLING FAN MOTOR


    1. Install the cooling fan motor with the 3 screws.

      Torque:
      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

  3. INSTALL NO. 2 FAN

    Note

    Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.


    1. Install the No. 2 fan with the nut.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

  4. INSTALL FAN

    Note

    Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.


    1. Install the fan with the nut.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

  5. INSTALL COOLING FAN ECU


    1. Install the cooling fan ECU with the 2 screws.

      Torque:
      2.6 N*m  { 27 kgf*cm, 23 in.*lbf }

    2. Connect the 4 clamps and wire harness.

    3. Connect the cooling fan motor connector and No. 2 cooling fan motor connector.

  6. INSTALL FAN SHROUD ASSEMBLY

    Click here

  7. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    Click here

  8. CONNECT ENGINE ROOM MAIN WIRE

    Click here

  9. CONNECT NO. 2 RADIATOR HOSE SUB-ASSEMBLY

    Click here

  10. INSTALL RADIATOR HOSE SUB-ASSEMBLY

    Click here

  11. INSTALL RADIATOR RESERVE TANK ASSEMBLY

    Click here

  12. INSTALL HOOD LOCK ASSEMBLY

    Click here

  13. CONNECT HOOD LOCK CONTROL CABLE ASSEMBLY

    Click here

  14. INSTALL HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  15. INSTALL INLET NO. 1 AIR CLEANER

    Click here

  16. ADD ENGINE COOLANT (for Engine)

    Click here

  17. INSPECT FOR COOLANT LEAK (for Engine)

    Click here

  18. INSTALL ENGINE UNDER COVER

  19. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  20. INSTALL COOL AIR INTAKE DUCT SEAL

    Click here