IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE


  1. INSTALL SPARK PLUG

    Tech Tips

    Perform "Inspection After Repair" after replacing a spark plug.



    1. Install the 4 spark plugs to the cylinder head sub-assembly.

      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

  2. INSTALL IGNITION COIL ASSEMBLY

    Tech Tips

    Perform "Inspection After Repair" after replacing an ignition coil assembly.



    1. Install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

    2. Connect the engine wire to the cylinder head cover sub-assembly with the 3 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Connect the 4 ignition coil assembly connectors.

  3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  4. PERFORM INITIALIZATION


    1. Perform "Inspection After Repair" after replacing an ignition coil assembly and spark plug.