HORN INSTALLATION

PROCEDURE

1. INSTALL LOW PITCHED HORN ASSEMBLY

   
   

   1. Install the low pitched horn assembly with the bolt.

      Torque:

      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

   2. Connect the connector.

2. INSTALL SUPER LOW PITCHED HORN ASSEMBLY (w/o Emergency Brake Signal)

   
   

   1. Install the super low pitched horn assembly with the bolt.

      Torque:

      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

   2. Connect the connector.

3. INSTALL HIGH PITCHED HORN ASSEMBLY (w/ Emergency Brake Signal)

   
   

   1. Install the high pitched horn assembly with the bolt.

      Torque:

      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

   2. Connect the connector.

4. INSTALL COOL AIR INTAKE DUCT SEAL

   Click here