REAR DOOR COURTESY SWITCH REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION (w/ Rear Seat Side Airbag)

   CAUTION:

   
   

   • Be sure to read Precaution thoroughly before servicing.

     Click here

   • If a rear seat airbag assembly has deployed, replace the rear seat airbag assembly, bench type rear seatback cover and bench type rear seatback pad with the necessary parts in accordance with the extent of the collision damage.

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

   Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. REMOVE REAR SEAT CUSHION ASSEMBLY

   Click here

4. REMOVE REAR SEAT CUSHION LOCK HOOK

   Click here

5. REMOVE REAR SEAT HEADREST ASSEMBLY (for Fixed Seat Type)

   Click here

6. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (for Fixed Seat Type)

   Click here

7. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type)

   Click here

8. REMOVE REAR SIDE SEAT BACK ASSEMBLY (for Fold Down Seat Type)

   Tech Tips

   Use the same procedure as for the RH side.

   Click here

9. REMOVE REAR DOOR SCUFF PLATE

   Click here

10. REMOVE REAR SEAT SIDE GARNISH

    Click here

11. REMOVE REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

    
    

    1. Disconnect the connector.

    2. 

       Using a T30 "TORX" socket wrench, remove the screw and rear door courtesy light switch assembly.