PROCEDURE
REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)
REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)
REMOVE FRONT SEAT ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE REAR SEAT ASSEMBLY (for Fixed Seat Type)
REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)
REMOVE REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)
REMOVE REAR SIDE SEATBACK ASSEMBLY RH (for Fold Down Seat Type)
REMOVE REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)
Tech Tips
Use the same procedure as for the RH side.
REMOVE FRONT DOOR SCUFF PLATE LH
Disengage the 10 claws and 2 guides to remove the front door scuff plate LH.
REMOVE FRONT DOOR OPENING TRIM COVER LH
Disengage the 3 claws (A).
Tech Tips
Disengage the claws from the lower side of the front door opening trim cover LH.
Disengage the claw (B) and guide to remove the front door opening trim cover LH.
REMOVE FRONT PILLAR GARNISH LH
*1 | Front Pillar Garnish Clip |
Protective Tape |
Apply protective tape around the front pillar garnish LH as shown in the illustration.
Pull the upper part of the front pillar garnish LH toward the inside of the cabin to disengage the clip and the front pillar garnish LH from the base of the front pillar garnish clip.
Tech Tips
Let the front pillar garnish LH hang from the front pillar garnish clip.
While pushing the tabs of the front pillar garnish clip as shown in the illustration, disengage it.
Note
The front pillar garnish clip is reusable if it is not damaged.
If the front pillar garnish clip is damaged, replace it with a new one.
Tech Tips
When the front pillar garnish clip cannot be disengaged easily:
*a | Tab |
While pushing the tab of the front pillar garnish clip with your finger, move the front pillar garnish clip in the direction shown in the illustration.
*a | Tab |
While pulling the front pillar garnish clip as shown in the illustration, push the tab of the front pillar garnish clip with a screwdriver and disengage the front pillar garnish clip.
Disengage the 3 guides to remove the front pillar garnish LH as shown in the illustration.
*1 | Curtain Shield Airbag Assembly LH |
*a | Protective Cover |
*b | Adhesive Tape |
Protect the curtain shield airbag assembly LH.
Cover the airbag with a piece of cloth or nylon and secure the edges of the cover with tape as shown in the illustration.
Note
Cover the curtain shield airbag assembly LH with a protective cover as soon as the front pillar garnish LH is removed.
REMOVE REAR DOOR SCUFF PLATE LH
Disengage the 9 claws and 2 guides to remove the rear door scuff plate LH.
REMOVE LOWER CENTER PILLAR GARNISH LH
Disengage the 2 claws and 3 guides.
Disengage the 5 clips to remove the lower center pillar garnish LH.
REMOVE CENTER PILLAR GARNISH ASSEMBLY LH
Remove the 2 screws.
Disengage the clip.
Pass the anchor of the front seat outer belt assembly LH through the center pillar garnish assembly LH and remove the center pillar garnish assembly LH.
REMOVE FRONT DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE FRONT DOOR OPENING TRIM COVER RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE FRONT PILLAR GARNISH RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE REAR DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE LOWER CENTER PILLAR GARNISH RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE CENTER PILLAR GARNISH ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE REAR SEAT SIDE GARNISH LH
Pull the rear seat side garnish LH as shown in the illustration to disengage the claw (A) and guide.
Disengage the 3 claws (B) to remove the rear seat side garnish LH.
Tech Tips
Disengage the claws from the upper side of the rear seat side garnish LH.
REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH
Using a clip remover, disengage the clip (A).
Disengage the 3 clips (B).
Disengage the 3 guides to remove the inner roof side garnish assembly LH.
REMOVE REAR SEAT SIDE GARNISH RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT
REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ Cover)
REMOVE RAIN SENSOR COVER (w/ Rain Sensor)
REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)
REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)
REMOVE MAP LIGHT ASSEMBLY
REMOVE SPOT LIGHT ASSEMBLY
REMOVE ASSIST GRIP SUB-ASSEMBLY
Tech Tips
Use the same procedure for the LH side and RH side.
*a | Protective Tape |
Using a screwdriver, disengage the 4 claws and remove the 2 assist grip covers.
Tech Tips
Tape the screwdriver tip before use.
Disengage the 2 clips and remove the assist grip.
Remove the 2 clips from the vehicle body.
REMOVE REAR ASSIST GRIP ASSEMBLY LH
Tech Tips
Use the same procedure as for the front side.
REMOVE REAR ASSIST GRIP ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE VISOR BRACKET COVER LH
Using a moulding remover, disengage the 4 claws and remove the visor bracket cover LH.
REMOVE VISOR ASSEMBLY LH
Remove the 2 screws and visor assembly LH.
REMOVE VISOR BRACKET COVER RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE VISOR ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE VISOR HOLDER
Tech Tips
Use the same procedure for the LH side and RH side.
*a | 45° |
Turn the visor holder approximately 45° and pull it out as shown in the illustration.
Disengage the 2 claws and remove the visor holder.
REMOVE ROOF HEADLINING ASSEMBLY
for Windshield Glass Side:
Disconnect each connector.
for Front Pillar LH Side:
Disengage the 3 clamps.
for Roof Side (w/o Sliding Roof):
Disengage the 10 claws.
Slide the roof headlining assembly to disengage the 3 clips and 3 guides as shown in the illustration.
Tech Tips
Leave the 3 clips installed the vehicle body.
for Roof Side (w/ Sliding Roof):
*a | Fastener | *b | Guide |
Disconnect the connector from the sliding roof drive gear sub-assembly.
Disengage the 10 claws and 8 fasteners.
Slide the roof headlining assembly to disengage the 3 clips and 2 guides as shown in the illustration.
Tech Tips
Leave the 3 clips installed the vehicle body.
Remove the roof headlining assembly from the vehicle through the front door LH as shown in the illustration.
Note
Do not damage the roof headlining assembly or vehicle interior.
Remove the 3 clips from the vehicle body as shown in the illustration.
REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
Remove the front door opening trim weatherstrip LH.
REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
Remove the rear door opening trim weatherstrip LH.
REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
Tech Tips
Use the same procedure as for the LH side.