FRONT ACCELERATION SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  4. REMOVE FRONT DOOR OPENING TRIM COVER LH

    Click here

  5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Tech Tips

    Use the same procedure for RHD and LHD.

    Click here

  6. REMOVE ACCELERATION SENSOR


    1. Fold back the floor carpet.

    2. B003VCI

      Disconnect the connector.

    3. Remove the 2 nuts and acceleration sensor.

      Note


      • Avoid any impact to the acceleration sensor.

      • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.