TCM(for 2GR) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE ENGINE ROOM ECU COVER

    Click here

  4. REMOVE TCM


    1. B003UYZ

      Disconnect the 2 engine wire connectors from the connector holder.

    2. Disengage the claw and disconnect the junction connector from the connector holder.

    3. B003UB8C01
      *1 Connector Holder
      *a Grommet

      Using a screwdriver, disengage the claw.

    4. Disconnect the grommet and connector holder from the engine room ECM box.

    5. B003TSJ

      Disconnect the 2 ECM connectors.

    6. B003UTQ

      Disconnect the 2 TCM connectors.

    7. B003VAD

      Remove the 2 nuts and TCM from the engine room ECM box.

      Note

      If a TCM has been struck or dropped, replace it.

    8. B003UHN

      Remove the 4 screws and 2 brackets from the TCM.