ДАТЧИК ОБОРОТОВ УСТАНОВКА

PROCEDURE


  1. INSTALL TRANSMISSION REVOLUTION SENSOR (NT)


    1. Apply Toyota Genuine CVT fluid FE to a new O-ring.

    2. Install the O-ring to the transmission revolution sensor (NT).

    3. Install the transmission revolution sensor (NT) to the continuously variable transaxle assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. Connect the connector.

  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NOUT)


    1. Apply Toyota Genuine CVT fluid FE to a new O-ring.

    2. Install the O-ring to the transmission revolution sensor (NOUT).

    3. Install the transmission revolution sensor (NOUT) to the continuously variable transaxle assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. Connect the connector.

  3. INSTALL TRANSMISSION REVOLUTION SENSOR (NIN)


    1. Apply Toyota Genuine CVT fluid FE to a new O-ring.

    2. Install the O-ring to the transmission revolution sensor (NIN).

    3. Install the transmission revolution sensor (NIN) to the continuously variable transaxle assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. Connect the connector.

  4. INSTALL BATTERY BRACKET REINFORCEMENT

    Click here

  5. INSTALL FRONT BATTERY BRACKET

    Click here

  6. CONNECT RADIATOR HOSE SUB-ASSEMBLY

    Click here

  7. INSTALL BATTERY TRAY

  8. INSTALL BATTERY

  9. INSTALL BATTERY CLAMP SUB-ASSEMBLY

    Click here

  10. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  11. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY


    1. Install the air cleaner filter element sub-assembly to the air cleaner case sub-assembly.

  12. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  13. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here

  14. CONNECT CABLE TO POSITIVE BATTERY TERMINAL

  15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  16. CHECK DATA LIST

    Click here