ВЫПУСКНОЙ КОЛЛЕКТОР СНЯТИЕ

PROCEDURE


  1. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  2. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

    Click here

  3. REMOVE WIRE HARNESS CLAMP BRACKET


    1. A01KBO6

      Detach the clamp and disconnect the fuel hose.

    2. Remove the bolt and wire harness clamp bracket.

  4. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01KB4P

      Remove the 3 bolts and No. 1 exhaust manifold heat insulator.

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01KC9S

      Remove the 2 bolts and disconnect the front exhaust pipe assembly from the center exhaust pipe assembly.

    2. A01KBPE

      Remove the 2 bolts, 2 compression springs and front exhaust pipe assembly.

    3. Remove the gasket from the front exhaust pipe assembly.

    4. Remove the gasket from the exhaust manifold.

  6. REMOVE MANIFOLD STAY


    1. A01KCVC

      Remove the 3 bolts and manifold stay.

  7. REMOVE EXHAUST MANIFOLD


    1. A01KDDA

      Remove the 5 nuts and exhaust manifold.

    2. Remove the exhaust manifold gasket from the cylinder head.

  8. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01KB3X

      Remove the 3 bolts and No. 2 exhaust manifold heat insulator.