БЛОК ДВИГАТЕЛЯ СНЯТИЕ

PROCEDURE


  1. REMOVE ENGINE WIRE

  2. REMOVE THROTTLE BODY ASSEMBLY

    Click here

  3. REMOVE AIR TUBE

    Click here

  4. REMOVE HEATER WATER OUTLET HOSE


    1. A00YR47

      Slide the clamp and disconnect the heater water outlet hose from the No. 1 water by-pass pipe.

  5. REMOVE HEATER WATER INLET HOSE

    A00YWAW

    1. Slide the clamp and disconnect the heater water inlet hose from the cylinder head sub-assembly.

  6. REMOVE INTAKE MANIFOLD

    Click here

  7. REMOVE WIRE HARNESS CLAMP BRACKET

    Click here

  8. REMOVE FUEL TUBE SUB-ASSEMBLY

    Click here

  9. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY

    Click here

  10. REMOVE FUEL INJECTOR ASSEMBLY

    Click here

  11. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Remove the engine oil level dipstick.

    2. A00YSB5

      Remove the bolt and engine oil level dipstick guide.

    3. Remove the O-ring from the engine oil level dipstick guide.

  12. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    Click here

  13. REMOVE MANIFOLD STAY

    Click here

  14. REMOVE EXHAUST MANIFOLD

    Click here

  15. REMOVE NO. 3 WATER BY-PASS PIPE (for CVT)


    1. A00YV9M

      Remove the 2 nuts, No. 3 water by-pass pipe and gasket.

  16. REMOVE NO. 1 SEAL PLATE (for Manual Transaxle)


    1. A00YVCS

      Remove the 2 nuts, No. 1 seal plate and gasket.

  17. REMOVE PCV HOSE


    1. Remove the PCV hose from the PCV valve.

  18. DISCONNECT NO. 3 WATER BY-PASS HOSE


    1. A00YSIL

      Slide the clamp and disconnect the No. 3 water by-pass hose from the water inlet housing.

  19. REMOVE WATER BY-PASS HOSE


    1. A00YT2M

      Slide the clamp and remove the water by-pass hose.

  20. REMOVE WATER INLET HOSE


    1. A00YQRE

      Slide the 2 clamps and remove the water inlet hose.

  21. REMOVE NO. 1 WATER BY-PASS PIPE


    1. A00YVRD

      Remove the 2 bolts and No. 1 water by-pass pipe.

  22. REMOVE WATER INLET

    Click here

  23. REMOVE THERMOSTAT

    Click here

  24. REMOVE IGNITION COIL ASSEMBLY

    Click here

  25. DISCONNECT UNION TO CHECK VALVE HOSE

    Click here

  26. REMOVE VACUUM PUMP ASSEMBLY

    Click here

  27. REMOVE NO. 1 VACUUM PUMP BRACKET


    1. A00YTNO

      Remove the 2 bolts, No. 1 vacuum pump bracket and gasket.