ПЕРЕДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА УСТАНОВКА

PROCEDURE


  1. INSTALL FRONT CRANKSHAFT OIL SEAL


    1. Apply MP grease to the lip of a new front crankshaft oil seal.

      Note

      Keep the lip free of foreign objects.

    2. A00YS6IN01

      Using SST and a hammer, tap in the front crankshaft oil seal as shown in the illustration.

      SST
      09223-50010
      Standard depth
      0 to 0.6 mm (0 to 0.0236 in.)

      Note


      • Do not tap the front crankshaft oil seal at an angle.

      • Wipe off any excess grease on the crankshaft.

  2. INSTALL CRANKSHAFT PULLEY


    1. Align the keyway of the crankshaft pulley with the key located on the crankshaft, and then slide the crankshaft pulley into place to install it.

    2. A00YXK5N01

      Using SST, install a new pulley bolt.

      SST
      09213-58014   ( 91551-80840 )
      09330-00021
      Torque:
      300 N*m  { 3059 kgf*cm, 221 ft.*lbf }

  3. INSTALL FAN AND GENERATOR V BELT

    Click here