PROCEDURE
INSTALL FAN AND GENERATOR V BELT
Using SST and a 22 mm wrench, rotate the V-ribbed belt tensioner pulley counterclockwise, and then install the fan and generator V belt.
CAUTION:
Be careful as the wrench only fits loosely on the fan and generator V belt tensioner tool set point. The wrench may come off the set point and cause injuries.
Be careful that your hands do not become jammed between parts such as the belt, pulleys, etc.
Note
Make sure that the fan and generator V belt is set properly on each pulley.
Make sure SST is installed as shown in the illustration. If not, SST and/or the fan and generator V belt may not be able to be removed.
INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH
Install the front suspension member reinforcement RH with the 4 bolts.
INSTALL REAR ENGINE UNDER COVER RH
Install the rear engine under cover RH with the 2 clips.
INSTALL NO. 1 ENGINE UNDER COVER