ДАТЧИК ПОЛОЖЕНИЯ РАСПРЕДВАЛА УСТАНОВКА

PROCEDURE


  1. INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)


    1. A01QRMY

      Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

    2. Install the camshaft position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • When reusing the camshaft position sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or does not jump out of position during installation.

    3. Connect the camshaft position sensor connector.

  2. INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. A01QRMY

      Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

    2. Install the camshaft position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • When reusing the camshaft position sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or does not jump out of position during installation.

    3. Connect the camshaft position sensor connector.

  3. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here