LIGHTING SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips


  • Use the following procedure to troubleshoot the lighting system.

  • *: Use the GTS.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.

    Result
    Proceed to
    NEXT

    NEXT

  3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*


    1. Use the GTS to check if the CAN communication system is functioning normally.


      Result
      Proceed to
      CAN DTC is not output
      CAN DTC is output

    CAN DTC is output

    GO TO CAN COMMUNICATION SYSTEM for LHD with Central Gateway ECU Click here for RHD with Central Gateway ECU Click here for LHD without Central Gateway ECU Click here for RHD without Central Gateway ECU Click here

    CAN DTC is not output

  4. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table.

      Click here

      Result
      Proceed to
      Fault is not listed in Problem Symptoms Table
      Fault is listed in Problem Symptoms Table

    Fault is listed in Problem Symptoms Table

    ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE

    Fault is not listed in Problem Symptoms Table

  5. OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Operation Check.

      Click here

    2. Terminals of ECU.

      Click here

    3. Data List / Active Test.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  6. ADJUST, REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

    NEXT

  7. CONFIRM TEST

    Result
    Proceed to
    NEXT

    NEXT

    END