MANUAL TRANSAXLE OIL REPLACEMENT

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  2. DRAIN MANUAL TRANSAXLE OIL


    1. A01QSAOC02
      *1 Filler Plug
      *2 Drain Plug

      Remove the manual transaxle filler plug and gasket.

    2. Remove the manual transaxle drain plug and gasket to drain the manual transaxle oil.

    3. Install a new gasket and the manual transaxle drain plug.

      Torque:
      39.2 N*m  { 400 kgf*cm, 29 ft.*lbf }

  3. ADD MANUAL TRANSAXLE OIL


    1. A01QUF1C01
      *a 0 to 5 mm (0 to 0.197 in.)

      Check that the oil level is within 0 to 5 mm (0 to 0.197 in.) from the bottom of the filler plug opening..

      Manual Transaxle Gear Oil
      "TOYOTA Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W"
      Standard capacity
      2.3 liters (2.4 US qts, 2.0 Imp. qts)

    2. Install a new gasket and the manual transaxle filler plug.

      Torque:
      39.2 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Note


      • When adding transaxle oil, make sure the vehicle is level.

      • An excessively large or small amount of oil may cause problems.

      • After adding oil, drive the vehicle and recheck the oil level.

  4. INSPECT FOR OIL LEAK

  5. INSTALL NO. 1 ENGINE UNDER COVER

    Click here