DRIVE BELT INSTALLATION

PROCEDURE


  1. INSTALL V-RIBBED BELT


    1. A01QRUEN02

      Set the V-ribbed belt onto every pulley.

    2. Attach a wrench to the hexagonal portion (A) or (B) of the V-ribbed belt tensioner assembly as shown in the illustration, and while rotating the V-ribbed belt tensioner assembly clockwise, remove the 5 mm bi-hexagon wrench.

      Note

      Check that the V-ribbed belt is properly set to each pulley.

  2. INSPECT V-RIBBED BELT

    Click here

  3. INSTALL REAR ENGINE UNDER COVER RH


    1. Install the rear engine under cover RH with the 4 clips.

  4. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here