IGNITION COIL AND SPARK PLUG INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL SPARK PLUG

   
   

   1. Using a 14 mm spark plug wrench and 100 mm extension bar, install the 4 spark plugs.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Tech Tips

      Perform "Inspection After Repairs" after replacing the spark plug.

      Click here

2. INSTALL IGNITION COIL ASSEMBLY

   
   
   1. 

      *1	Cylinder Head Cover
      *2	Spark Plug Tube
      *3	Plug Cap

      Install the 4 ignition coil assemblies with the 4 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      When installing the ignition coil assembly, do not damage the plug cap with the cylinder head cover opening or the upper edge of the spark plug tube.

      Tech Tips

      Perform "Inspection After Repairs" after replacing the ignition coil assembly.

      Click here

   2. Connect the 4 ignition coil assembly connectors.

3. INSTALL NO. 2 CYLINDER HEAD COVER

   Click here