CHASSIS GENERAL MAINTENANCE

PROCEDURE


  1. INSPECT CLUTCH FLUID


    1. Inspect the clutch fluid.

      Type See Procedure
      for 1AD-FTV

      Click here

      for 2AD-FTV

      Click here

      for 2AR-FE

      Click here

      for 3ZR-FAE

      Click here

      for 3ZR-FE

      Click here

  2. REPLACE CLUTCH FLUID


    1. Replace the clutch fluid.

      Type See Procedure
      for 1AD-FTV

      Click here

      for 2AD-FTV

      Click here

      for 2AR-FE

      Click here

      for 3ZR-FAE

      Click here

      for 3ZR-FE

      Click here

  3. INSPECT STEERING LINKAGE AND GEAR HOUSING


    1. Check the steering wheel free play.

      Click here

    2. Check the steering linkage for looseness or damage.


      1. Check that the tie rod ends do not have any play.

      2. Check that the dust seals and boots are not damaged.

      3. Check that the boot clamps are not loose.

      4. Check that the steering gear housing is not damaged.

  4. INSPECT BALL JOINTS AND DUST COVERS


    1. Inspect the ball joints for excessive looseness.


      1. Jack up the front of the vehicle and place wooden blocks with a height of 180 to 200 mm (7.09 to 7.87 in.) under the front tires.

      2. Lower the vehicle until the front coil spring has about half its ordinary load. Place stands under the vehicle for safety.

      3. Check that the front wheels are pointing straight ahead. Use wheel chocks on all 4 wheels.

      4. Using a lever, pry up the end of the lower arm. Check the amount of play.

        Maximum ball joint vertical play
        0 mm (0 in.)

        If there is any play, replace the ball joint.

    2. Check the dust cover for damage.

  5. INSPECT DRIVE SHAFT BOOTS


    1. Check the drive shaft boots for loose clamps, cracks, grease leaks, kinks or damage.

  6. INSPECT SHIFT LEVER (for Manual Transaxle)


    1. Check the shift lever for manual transaxle.

      Type See Procedure
      EA64

      Click here

      EA64F

      Click here

      EB61

      Click here

      EB63

      Click here

      EB61F

      Click here

      EB63F

      Click here

  7. INSPECT MANUAL TRANSAXLE OIL


    1. Visually check the manual transaxle for oil leakage. If fluid is leaking, find the cause and repair it.

    2. Inspect the manual transaxle oil.

      Type See Procedure
      EA64

      Click here

      EA64F

      Click here

      EB61

      Click here

      EB63

      Click here

      EB61F

      Click here

      EB63F

      Click here

  8. REPLACE MANUAL TRANSAXLE OIL


    1. Replace the manual transaxle oil.

      Type See Procedure
      EA64

      Click here

      EA64F

      Click here

      EB61

      Click here

      EB63

      Click here

      EB61F

      Click here

      EB63F

      Click here

  9. INSPECT AUTOMATIC TRANSAXLE FLUID


    1. Visually check the automatic transaxle for oil leakage. If fluid is leaking, find the cause and repair it.

    2. Inspect the automatic transaxle fluid.

      Type See Procedure
      U660F

      Click here

      U760E

      Click here

      U760F

      Click here

  10. REPLACE AUTOMATIC TRANSAXLE FLUID


    1. Replace the automatic transaxle fluid.

      Type See Procedure
      U660F

      Click here

      U760E

      Click here

      U760F

      Click here

  11. INSPECT CONTINUOUSLY VARIABLE TRANSAXLE FLUID


    1. Visually check the continuously variable transaxle for oil leakage. If fluid is leaking, find the cause and repair it.

    2. Inspect the continuously variable transaxle fluid.

      Type See Procedure
      K111

      Click here

      K111F

      Click here

  12. REPLACE CONTINUOUSLY VARIABLE TRANSAXLE FLUID


    1. Replace the continuously variable transaxle fluid.

      Type See Procedure
      K111

      Click here

      K111F

      Click here

  13. INSPECT TRANSFER OIL


    1. Visually check the transfer for oil leakage. If fluid is leaking, find the cause and repair it.

    2. Inspect the transfer oil.

      Type See Procedure
      GF1A

      Click here

  14. REPLACE TRANSFER OIL


    1. Replace the transfer oil.

      Type See Procedure
      GF1A

      Click here

  15. INSPECT FRONT DIFFERENTIAL OIL


    1. Visually check the front differential for oil leakage. If fluid is leaking, find the cause and repair it.

    2. Inspect the front differential oil.

      Type See Procedure
      U660F

      Click here

      U760E

      Click here

      U760F

      Click here

      EA64

      Click here

      EA64F

      Click here

      EB61

      Click here

      EB63

      Click here

      EB61F

      Click here

      EB63F

      Click here

      K111

      Click here

      K111F

      Click here

  16. REPLACE FRONT DIFFERENTIAL OIL


    1. Replace the front differential oil.

      Type See Procedure
      U660F

      Click here

      U760E

      Click here

      U760F

      Click here

      EA64

      Click here

      EA64F

      Click here

      EB61

      Click here

      EB63

      Click here

      EB61F

      Click here

      EB63F

      Click here

      K111

      Click here

      K111F

      Click here

  17. INSPECT REAR DIFFERENTIAL OIL


    1. Visually check the rear differential for oil leakage. If fluid is leaking, find the cause and repair it.

    2. Inspect the rear differential oil.

      Click here

  18. REPLACE REAR DIFFERENTIAL OIL


    1. Replace the rear differential oil.

      Click here

  19. INSPECT FRONT AND REAR SUSPENSION


    1. Check the front and rear suspension.

      Suspension Type See Procedure
      Front Suspension

      Click here

      Rear Suspension

      Click here