PROCEDURE
REMOVE NO. 1 ENGINE UNDER COVER
DRAIN MANUAL TRANSAXLE OIL
*1 | Filler Plug |
*2 | Drain Plug |
Remove the manual transaxle filler plug and gasket.
Remove the manual transaxle drain plug and gasket to drain the manual transaxle oil.
Install a new gasket and the manual transaxle drain plug.
ADD MANUAL TRANSAXLE OIL
*a | 0 to 5 mm (0 to 0.197 in.) |
Check that the oil level is within 0 to 5 mm (0 to 0.197 in.) from the bottom of the filler plug opening..
Manual Transaxle Gear Oil |
---|
"TOYOTA Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W" |
Standard capacity |
---|
2.3 liters (2.4 US qts, 2.0 Imp. qts) |
Install a new gasket and the manual transaxle filler plug.
Note
When adding transaxle oil, make sure the vehicle is level.
An excessively large or small amount of oil may cause problems.
After adding oil, drive the vehicle and recheck the oil level.
INSPECT FOR OIL LEAK
INSTALL NO. 1 ENGINE UNDER COVER