СИСТЕМА МЕХАНИЧЕСКОЙ ТРАНСМИССИИ ПРОЦЕДУРА ПОИСКА НЕИСПРАВНОСТЕЙ

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips


  • Use the following procedure to troubleshoot the manual transaxle system.

  • *: Use the GTS.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    Click here

    Result
    Proceed to
    NEXT

    NEXT

  3. INSPECT BATTERY VOLTAGE


    1. Measure the battery voltage.

      Standard Voltage
      11 to 14 V

      Tech Tips

      If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

      Result
      Proceed to
      NEXT

    NEXT

  4. CHECK CAN COMMUNICATION SYSTEM*


    1. Using the GTS, check if the CAN communication system is functioning normally.


      CAN Bus Check

      Tech Tips


      • Refer to CAN Bus Check in CAN Communication System.

        w/o Central Gateway ECU: Click here

        w/ Central Gateway ECU: Click here

      • The ECM is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there are no malfunctions in the CAN communications system.

      Result
      Result Proceed to
      CAN communication system DTCs are not output. A
      CAN communication system DTCs are output. B

    B

    GO TO CAN COMMUNICATION SYSTEM w/o Central Gateway ECU: Click here
    GO TO CAN COMMUNICATION SYSTEM w/ Central Gateway ECU: Click here

    A

  5. CHECK AND CLEAR DTCS AND FREEZE FRAME DATA*


    1. Refer to DTC Check/Clear.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  6. SELECT CHECK MODE DIAGNOSIS*


    1. Refer to Check Mode Procedure.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  7. CHECK FOR DTC*


    1. Proceed to DTC Check/Clear.

      Click here


      Powertrain > Transmission > Trouble Codes
      Result
      Result Proceed to
      DTCs are not output. A
      DTCs are output. B

    B

    DIAGNOSTIC TROUBLE CODE CHART Click here

    A

  8. SYMPTOM SIMULATION


    1. Refer to Symptom Simulation.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  9. COMPONENT INSPECTION

    Result
    Proceed to
    NEXT

    NEXT

  10. REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

    NEXT

  11. CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT

    END

  12. DIAGNOSTIC TROUBLE CODE CHART


    1. Proceed to Diagnostic Trouble Code Chart.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  13. CIRCUIT INSPECTION*

    Result
    Proceed to
    NEXT

    NEXT

  14. IDENTIFICATION OF PROBLEM

    Result
    Proceed to
    NEXT

    NEXT

  15. REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

    NEXT

  16. CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT

    END