ТРОС МЕХАНИЗМА ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ СНЯТИЕ

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  2. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)


  3. REMOVE BATTERY (w/ Glow Plug Controller)

    Click here

  4. REMOVE BATTERY (w/o Glow Plug Controller)

    Click here

  5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (w/ Glow Plug Controller)

    Click here

  6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (w/o Glow Plug Controller)

    Click here

  7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (w/ Glow Plug Controller)

    Click here

  8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (w/o Glow Plug Controller)

    Click here

  9. REMOVE NO. 1 AIR TUBE


    1. A01TACX

      Disconnect the 2 wire harness clamps from the manual transaxle assembly.

    2. Remove the 4 bolts.

    3. Loosen the 2 hose clamps and remove the No. 1 air tube.

  10. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  11. REMOVE NO. 1 FRONT FLOOR HEAT INSULATOR


    1. A01T8EY

      Remove the 3 nuts and No. 1 front floor heat insulator.

  12. REMOVE REAR CONSOLE BOX ASSEMBLY (for Hatchback, Wagon)

    Click here

  13. REMOVE REAR CONSOLE BOX ASSEMBLY (for Sedan)

    Click here

  14. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A01T8OC

      Remove the clip, and disconnect the transmission control select cable from the floor shift lever assembly.

    2. A01TC1J

      Disconnect the transmission control shift cable from the floor shift lever assembly.

    3. A01TCQJ

      Disengage the 2 claws and separate the transmission control cable assembly from the floor shift lever assembly.

    4. A01TDR2N02

      Remove the 2 clips (A) and disconnect the transmission control cable assembly from the manual transaxle assembly.

    5. Remove the 2 clips (B) and disconnect the transmission control cable assembly from the control cable bracket assembly.

    6. A01TDKQ

      Remove the bolt and disconnect the transmission control cable assembly from the rear engine mounting bracket.

    7. A01T9TX

      Remove the 2 nuts and transmission control cable assembly from the vehicle exterior.